How to Replace Catalytic Convertor Pipe 2007-2012 Nissan Versa

Buy Now! New Catalytic Converter from 1AAuto.com https://trq.video/ia-1ACCD00365 This video shows you how to install a new catalytic converter pipe from TRQ on your 2007-2012 Nissan Versa. Catalytic converters are an important part of a clean emissions system on your car or truck. Over time, they can wear out, break down, or become clogged, causing poor performance, and extra pollution. This repair was done on a 2011 Nissan Versa S 1.8L Hatchback 4-Door FWD Automatic and the process should be similar on the following vehicles: 2007 Nissan Versa 2008 Nissan Versa 2009 Nissan Versa 2010 Nissan Versa 2011 Nissan Versa 2012 Nissan Versa Tools you will need: • 22mm Wrench • 12mm Socket https://trq.video/obCF-1AXAA00015 • 14mm Socket https://trq.video/obCF-1AXAA00015 • 16mm Socket https://trq.video/obCF-1AXAA00015 • Socket Extensions https://trq.video/obCF-1AXAA00015 • Anti-Seize Grease • Gloves https://trq.video/oajv-1AXSS00048 • Rust Penetrant • Safety Glasses • Floor Jack https://trq.video/oaas-1AXAA00068 • Pole Jack • Wheel Chocks Subscribe:    / @trq   Check out our playlist: 2007-2012 Nissan Versa 1st Generation:    • 2007-2012 Nissan Versa 1st Generation   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.