How to Replace Blend Door Actuator 2009-2014 Ford F-150

Buy Now! New HVAC Blend Door Actuator from 1AAuto.com https://trq.video/ic-1AZMX00490 This video shows you how to install a new blend door actuator from TRQ on your 2009-2014 Ford F-150. The temperature blend door actuator is the electric motor that is responsible for physically opening and closing the blend doors in your vehicle's HVAC system. If the actuator isn't working, then you won't be able to control the temperature of the air coming out of the vents! This repair was done on a 2009 Ford F-150 Lariat 5.4L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles: 2009 Ford F-150 2010 Ford F-150 2011 Ford F-150 2012 Ford F-150 2013 Ford F-150 2014 Ford F-150 Tools you will need: • 8mm Wrench https://trq.video/oh2-1AXAA00011 • 7mm Socket https://trq.video/obbk-1AXAA00017 • 8mm Socket https://trq.video/obbk-1AXAA00017 • Trim Tool Set https://trq.video/oab6-1AXXX00006 • Ratchet https://trq.video/obBq-1AXAA00016 • Gloves https://trq.video/o7Q-1AXSS00048 • Safety Glasses Subscribe:    / @trq   Check out our playlist: Ford F150 2009-2014 12th Gen:    • Ford F150 2009-2014 12th Gen   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.