How to Replace Serpentine Belt Tensioner Assembly 2007-2013 Acura MDX

Buy Now! New Serpentine Belt Tensioner Assembly from 1AAuto.com https://trq.video/ib-1AEBT00142 This video shows you how to install a serpentine belt tensioner assembly on your 2007-2013 Acura MDX. That squealing noise coming from your vehicle’s engine compartment could be a slipping belt, or it could be a bad pulley bearing, or both. A bad pulley could eventually damage the belt, which could create even further damage. Replace both at the same time with this convenient kit! This repair was done on a 2008 Acura MDX Base 3.7L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2007 Acura MDX 2008 Acura MDX 2009 Acura MDX 2010 Acura MDX 2011 Acura MDX 2012 Acura MDX 2013 Acura MDX Tools you will need: • Pry Bar https://trq.video/oIo-1AXAA00020 • 10mm Socket https://trq.video/oaLg-1AXAA00017 • 12mm Socket https://trq.video/oa3d-1AXAA00015 • 14mm Socket https://trq.video/oa3d-1AXAA00015 • Serpentine Belt Tensioner Tool https://trq.video/ob2-1AXAA00019 • Ratchet https://trq.video/obe5-1AXAA00016 • Torque Wrench https://trq.video/oak5-1AXAA00044 • Gloves https://trq.video/oyI-1AXSS00048 • Safety Glasses Subscribe:    / @trq   Check out our playlist: Acura MDX 2nd Generation 2007-2013:    • Acura MDX 2nd Generation 2007-2013   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.