How to Replace Rear Window Regulator 2007-2013 Chevrolet Silverado
Buy Now! New Power Window Motor & Regulator Assembly from 1AAuto.com https://trq.video/ib-1AWRG00821 This video shows you how to install a rear window regulator on your 2007-2013 Chevrolet Silverado. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle! This repair was done on a 2009 Chevrolet Silverado 1500 LTZ 5.3L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles: 2007 Chevrolet Silverado 1500 2008 Chevrolet Silverado 1500 2009 Chevrolet Silverado 1500 2010 Chevrolet Silverado 1500 2011 Chevrolet Silverado 1500 2012 Chevrolet Silverado 1500 2013 Chevrolet Silverado 1500 Tools you will need: • 10mm Socket https://trq.video/oaIi-1AXAA00017 • Trim Tool Set https://trq.video/oSR-1AXXX00006 • Wire Cutters • Ratchet https://trq.video/obce-1AXAA00016 • Torque Wrench https://trq.video/oair-1AXAA00044 • Gloves https://trq.video/ovo-1AXSS00048 • Painter's Tape • Safety Glasses • Wire Ties • Pick https://trq.video/oCC-1AXAA00037 • Razor Blade / Gasket Scraper Subscribe: / @trq Check out our playlist: Chevy Silverado 2nd Generation 2007-2014: • Chevy Silverado 2nd Generation 2007-2014 ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
