How to Replace Headlight Wiring Harness 2007-2013 Chevrolet Silverado

Buy Now! New Headlight Wiring Harness from 1AAuto.com https://trq.video/ia-DMZWH00007 This video shows you how to install a headlight wiring harness on your 2007-2013 Chevrolet Silverado. This repair was done on a 2009 Chevrolet Silverado 1500 LTZ 5.3L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles: 2007 Chevrolet Silverado 1500 2008 Chevrolet Silverado 1500 2009 Chevrolet Silverado 1500 2010 Chevrolet Silverado 1500 2011 Chevrolet Silverado 1500 2012 Chevrolet Silverado 1500 2013 Chevrolet Silverado 1500 Tools you will need: • 10mm Wrench https://trq.video/oKv-1AXAA00010 • 10mm Socket https://trq.video/oaJK-1AXAA00017 • 7mm Socket https://trq.video/oaJK-1AXAA00017 • Trim Tool Set https://trq.video/oTD-1AXXX00006 • 1/4 Inch Ratchet https://trq.video/oaJK-1AXAA00017 • 3/8 Inch Drive Ratchet https://trq.video/oaZR-1AXAA00015 • Gloves https://trq.video/owW-1AXSS00048 • Safety Glasses • Utility Knife https://trq.video/ofC-1AXAA00082 Subscribe:    / @trq   Check out our playlist: Chevy Silverado 2nd Generation 2007-2014:    • Chevy Silverado 2nd Generation 2007-2014   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.