How to Replace Mass Air Flow Sensor 2008-2017 Buick Enclave (3.6L V6)

Buy Now! New Mass Air Flow Sensor from 1AAuto.com https://trq.video/ia-1AEAF00265 This video shows you how to install a new TRQ MAF sensor in your 2008-2017 Buick Enclave (3.6L V6). The Mass Air Flow (MAF) sensor determines the mass flow rate of air entering your vehicle. A trouble code indicating the sensor is not working properly could be because it is dirty, malfunctioning, or damaged, in which case your vehicle may run poorly or enter limp mode. Fortunately, sensors are typically easy to replace. Estimated installation time for a professional technician is approximately: 30 minutes This repair was done on a 2014 Buick Enclave Premium 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2008 Buick Enclave 2009 Buick Enclave 2010 Buick Enclave 2011 Buick Enclave 2012 Buick Enclave 2013 Buick Enclave 2014 Buick Enclave 2015 Buick Enclave 2016 Buick Enclave 2017 Buick Enclave Tools you will need: • Pocket Screwdriver • 7/32 Inch Socket https://trq.video/odj-1AXAA00018 • Ratchet https://trq.video/ocAT-1AXAA00016 • Socket Extensions https://trq.video/ocAQ-1AXAA00015 • Brake Parts Cleaner • Gloves https://trq.video/obQW-1AXSS00048 • Paper Towels https://trq.video/o2s-1AXSS00035 • Safety Glasses Subscribe:    / @trq   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.