Building #Pwnagotchi explained: how to hack WiFi #shorts

We made a cheap device that can automatically hack any Wi-Fi network even if it's password protected. Firstly, we need a single board computer. It only costs about $15 and can be purchased on the internet. We plug Raspberry Pi 0W into the power supply for $19.56 then we plug the screen into the connector on the board Pwnagotchi uses an e-link display that can be bought for approximately $9 When the hardware is assembled, we need to download the firmware from the Pwnagotchi project website and write it to an SD card using Balena Etcher program. Once the firmware has been written on the SD card, we access it on the computer, open the boot folder and create a configuration file called config.dotl. In this file, we will need to specify the virtual pet's name screen, type and the names of our home Wi-Fi networks. Now just power up Pwnagotchi, and the device will work automatically. Subscribe to our channel: https://bit.ly/SubscribeToSumsub Sumsub — empowering compliance and anti-fraud teams to fight money laundering, terrorist financing, and online fraud. More about us: https://sumsub.com   / sumsubcom     / sumsubcom     / sumsub