How to replace the Headlight Assembly 2013-2018 Nissan Altima 🚗
Find the parts used in the video on CarParts.com just there https://carparts.solutions/ALTIMA Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS Headlight : https://carparts.solutions/HeadlightD... and https://carparts.solutions/HeadlightP... 💪 TIGHTENING TORQUES No tightening torques for this operation 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Nissan Altima : https://carparts.solutions/ToolBox List of the tools we used to replace the headlight on a Nissan Altima : Hydraulic jack : https://carparts.solutions/FloorJack Jack stands : https://carparts.solutions/JackStands Wheel lug wrench Fork Multi-bit screwdriver 10mm socket Ratchet Phillips screwdriver Needle-nose pliers Extender Don't forget to subscribe : / @carpartscomofficial 🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : 2013 Nissan Altima 2014 Nissan Altima 2015 Nissan Altima 2016 Nissan Altima 2017 Nissan Altima 2018 Nissan Altima 📽 🛠 USEFUL VIDEOS 🛠 📽 How to jack your Nissan Altima safely : • How to jack your Nissan Altima safely... ⚠️ CARPARTS.COM'S INFOS In order to change the headlights on your vehicle, you will need to remove the front bumper cover to have full access. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro 0:24 Remove the radiator support cover 0:41 Remove the top holding bolts, screws and rivets 1:37 Remove the bottom holding bolts, screws and rivets 2:20 Disconnect the bulbs and cables from the bumper cover 2:42 Disengage the cover from the fender 3:08 Remove the bumper cover 3:29 Unscrew the headlight holding bolts 3:39 Remove the headlight 4:21 Install the new headlight 5:04 Screw the bolts back 5:14 Reinstall the bumper cover 5:28 Reinstall the bumper cover in the fenders 5:42 Put the components back in place 6:06 Put the radiator support cover back 6:19 Put the holding bolts, screws and rivets back 7:01 Put your Altima on the ground
