tp link ac750 Rauter ko extender router kase banaye | tp link Router ko extender router Kaise banaen

tp link ac750 Rauter ko extender router kase banaye | tp link Router ko extender router Kaise banaen ne of the most demanding settings in a router is also the wireless repeater / range extender (WDS bridging function) settings, and unfortunately this setting is not supported in many popular TP-Link Archer series routers. but don't worry, you can setup your router as a wired repeater with the help of LAN cable up to 100 meters (tested). Well, some Archer series routers support wds bridging function. Go to system tool - system parameters there you will find wds bridging settings under 2.4GHz / 5GHz wireless network. Note:- After complete setup, connect the LAN cable from the LAN port of the ap router / existing router to the ap client router / repeater's WAN port. If router's WAN port has STOPPED working (damaged) then connect the LAN cable to any of the LAN ports of the router. 1) TP-Link Archer Router Internet connection & Wireless network setup (Static / PPPoE) 2) TP-Link Archer Router 5 Basic security settings (time synchronization from internet 3) TP-Link Archer Router IP Address Reservation Settings (Give Permanent IP Address) 4) TP-Link Archer Router USB Drive Sharing and Security Settings (ROUTER USB SHARE): 5) TP-Link Archer Router Access Control settings (Allow or Block users):- 6) TP-Link Archer Configuration Backup | Reset | Restore Settings:- TP-Link Archer Router dual band ip :- 192.168.0.1