How to Replace Ignition Coil Boots 2009-2019 Ford Flex

Buy Now! New Ignition Coil Boot Set from 1AAuto.com https://trq.video/ib-1AERK01299 This video shows you how to install new ignition coil boots from TRQ on your 2009-2019 Ford Flex. Ignition coil boots cover and protect the connection between the ignition coil and the spark plug. Tears or holes in the boot could interfere with ignition timing, and could also let electrical current jump off the intended path. This repair was done on a 2013 Ford Flex SEL 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2009 Ford Flex 2010 Ford Flex 2011 Ford Flex 2012 Ford Flex 2013 Ford Flex 2014 Ford Flex 2015 Ford Flex 2016 Ford Flex 2017 Ford Flex 2018 Ford Flex 2019 Ford Flex Tools you will need: • 8mm Socket https://trq.video/oa7v-1AXAA00017 • Needle nose pliers https://trq.video/oCI-1AXAA00051 • Needle nose pliers https://trq.video/oCI-1AXAA00052 • Ratchet https://trq.video/obyg-1AXAA00016 • Torque Wrench https://trq.video/oaB6-1AXAA00044 • Gloves https://trq.video/oZX-1AXSS00048 • Safety Glasses • Silicone Paste Subscribe:    / @trq   Check out our playlist: Ford Flex 1st Generation 2009-2019:    • Ford Flex 1st Generation 2009-2019   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.