Easy Steps To Control Windshield Wipers & Washer On A Kia Sportage!

Controlling the windshield wipers and washer on your Kia Sportage is simple. Here are the easy steps: Locate the Wiper Control Lever: The wiper control lever is typically mounted on the right side of the steering column. Adjust the Wiper Speed: Move the wiper control lever up or down to select the desired wiper speed. There are usually multiple speed settings to choose from, including intermittent, low, high, and sometimes a manual continuous setting. Activate the Intermittent Wipers (if available): If your Kia Sportage is equipped with intermittent wipers, you can adjust the delay between wipes by turning the control knob located at the end of the wiper control lever. Turn on the Washer Fluid: To activate the windshield washer, push the button or pull the lever located at the end of the wiper control lever. This will spray washer fluid onto the windshield to help clean away dirt and debris. Adjust the Wiper Blades (Optional): If you need to adjust the angle or position of the wiper blades, you can do so manually by lifting the wiper arms away from the windshield and moving them into the desired position. Be gentle to avoid damaging the wiper blades or windshield. Monitor the Washer Fluid Level: Periodically check the level of washer fluid in the reservoir under the hood and refill it as needed to ensure you always have an ample supply for cleaning the windshield. By following these steps, you can easily control the windshield wipers and washer on your Kia Sportage to ensure clear visibility during inclement weather conditions. If you have any specific questions about the operation of your Kia Sportage's wipers and washer, refer to the owner's manual for more detailed instructions and information.