How to Replace Door Hinge Pin with Roller 2007-2013 Chevrolet Silverado 1500

Buy Now! New Hinge Pin with Roller from 1AAuto.com https://trq.video/ia-DMDMX00009 This video shows you how to install a front door hinge pin with roller on your 2007-2013 Chevrolet Silverado 1500. This repair was done on a 2009 Chevrolet Silverado 1500 LTZ 5.3L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles: 2007 Chevrolet Silverado 1500 2008 Chevrolet Silverado 1500 2009 Chevrolet Silverado 1500 2010 Chevrolet Silverado 1500 2011 Chevrolet Silverado 1500 2012 Chevrolet Silverado 1500 2013 Chevrolet Silverado 1500 Tools you will need: • Pry Bar https://trq.video/oPY-1AXAA00020 • 10mm Socket https://trq.video/oaZ4-1AXAA00017 • 11mm Socket https://trq.video/objE-1AXAA00015 • 13mm Socket https://trq.video/objE-1AXAA00015 • Grease Gun • Channel-Lock Pliers https://trq.video/ojY-1AXAA00139 • Ratchet https://trq.video/obtx-1AXAA00016 • Socket Extensions https://trq.video/objE-1AXAA00015 • Drill • Block of Wood • Gloves https://trq.video/oRG-1AXSS00048 • Painter's Tape • Safety Glasses • Floor Jack https://trq.video/oXK-1AXAA00068 • Hammer • Punch • Vise Subscribe:    / @trq   Check out our playlist: Chevy Silverado 2nd Generation 2007-2014:    • Chevy Silverado 2nd Generation 2007-2014   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.