EXCITEL ROUTER HOW TO SETUP MODEL PPC

ROUTER SETUP Unbox and Connect: Start by unboxing the router and connecting it to the power source using the provided power adapter. Connect the router to the fiber optic modem provided by Excitel using an Ethernet cable. WAN Configuration: Log into the router's web interface using a web browser. This is typically done by entering the router's IP address (e.g., 192.168.1.1) in the browser's address bar. Consult your router's manual for the exact IP address and login credentials. WAN Settings: In the router's settings, navigate to the WAN or Internet setup section. You'll need to configure the WAN connection type. For fiber connections, this is often PPPoE (Point-to-Point Protocol over Ethernet). You'll need the PPPoE username and password provided by Excitel. Enter these credentials, and the router should establish a connection to the fiber network. Wireless Setup: If your router has Wi-Fi capabilities, navigate to the wireless settings section. Here, you can set up the wireless network name (SSID) and password. Make sure to secure your Wi-Fi network with a strong password to prevent unauthorized access. LAN Configuration: Check the LAN (Local Area Network) settings to ensure that they are set to a suitable IP address range for your network. The default settings are usually sufficient for most home networks. DNS Configuration: You might want to configure custom DNS servers for better performance or security. You can use DNS servers provided by Google (8.8.8.8 and 8.8.4.4) or Cloudflare (1.1.1.1). Save and Reboot: After making the necessary changes, save the settings and reboot the router. This will apply the configuration changes and ensure that the router is functioning properly. Test Connectivity: Once the router has rebooted, test your internet connectivity by connecting a device (computer, smartphone, etc.) to the Wi-Fi network or directly to the router using an Ethernet cable. Open a web browser and confirm that you can access websites. Keep in mind that the exact steps and settings may vary based on your specific router model. If you're unsure about any steps or settings, refer to the documentation provided by Excitel or contact their customer support