Final alignment on Ians Myford

Ian is a brilliant Mechanical engineer in the scraping club, he was very keen to get his myford back together after we'd scraped the bed some time back so I quickly scraped saddle into alignment as well as the headstock to lower the centerline with the chuck end bearing pocket at 0.0005" high. the tailstock was still 0.0003" low and ideally I would have kept scraping the headstock until I had the tailstock centerline 2-3 tenths high but it was a huge improvement regardless and he was very keen to get it back together. Ians channel below (just videos on the Laser interferometer but hopefully some Myford videos soon)    / @ianmacpherson6749