How to Replace Mass Air Flow Sensor 1994-2004 Ford Mustang

Buy Now! New Mass Air Flow Sensor from 1AAuto.com https://trq.video/ib-1AEAF00170 This video shows you how to install a new TRQ MAF sensor in your 1994-2004 Ford Mustang. The Mass Air Flow (MAF) sensor determines the mass flow rate of air entering your vehicle. A trouble code indicating the sensor is not working properly could be because it is dirty, malfunctioning, or damaged, in which case your vehicle may run poorly or enter limp mode. Fortunately, sensors are typically easy to replace. This repair was done on a 2003 Ford Mustang Base 3.8L Convertible 2-Door RWD Automatic and the process should be similar on the following vehicles: 1994 Ford Mustang 1995 Ford Mustang 1996 Ford Mustang 1997 Ford Mustang 1998 Ford Mustang 1999 Ford Mustang 2000 Ford Mustang 2001 Ford Mustang 2002 Ford Mustang 2003 Ford Mustang 2004 Ford Mustang Tools you will need: • Flat Blade Screwdriver https://trq.video/obEQ-1AXAA00013 • T20 Driver • 1/4 Inch Ratchet https://trq.video/obEb-1AXAA00017 • 3/8 Inch Drive Ratchet https://trq.video/ob4f-1AXAA00015 • Gloves https://trq.video/oaYj-1AXSS00048 • Safety Glasses Subscribe:    / @trq   Check out our playlist: Ford Mustang 4th Generation 1994-2004:    • Ford Mustang 4th Generation 1994-2004   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.