How to Install Fog Light Kit 2007-2012 Nissan Altima
Buy Now! New Fog Light Kit from 1AAuto.com https://trq.video/ib-1ALFZ00101 This video shows how to install new TRQ fog light kit to 2007-2012 Nissan Altima. This repair was done on a 2008 Nissan Altima S 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles: 2007 Nissan Altima 2008 Nissan Altima 2009 Nissan Altima 2010 Nissan Altima 2011 Nissan Altima 2012 Nissan Altima Tools you will need: • Phillips Head Screwdriver https://trq.video/obm9-1AXAA00013 • 10mm Socket https://trq.video/obd6-1AXAA00017 • 21mm Socket • Circuit Tester • Trim Tool Set https://trq.video/oad7-1AXXX00006 • Pliers • Wire Cutters • Wire End Cutters • 1/2 Inch Ratchet • 1/4 Inch Ratchet https://trq.video/obd6-1AXAA00017 • 3/8 Inch Drive Ratchet https://trq.video/obyo-1AXAA00015 • Torque Wrench https://trq.video/oaHI-1AXAA00044 • Fuse Tap • Gloves https://trq.video/oacS-1AXSS00048 • Safety Glasses • Wire Butt Connectors • Wire Terminals • Wire Ties Subscribe: / @trq Check out our playlist: Nissan Altima 2007-2012 4th Gen: • Nissan Altima 2007-2012 4th Gen ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
