Tail Light Trouble? Here's How to Fix a Melted Connector on Your Mercedes C Class

Tail Light Trouble? Here's How to Fix a Melted Connector on Your Mercedes C Class If you're experiencing issues with the earth wire on a connector for your Mercedes C Class tail light, one solution may be to cut the wire and wire it straight to the circuit board. To do this, you will need to locate the circuit board for your tail light and the earth wire on the connector. Use wire strippers to remove a small portion of the insulation from the earth wire, exposing the metal wire beneath. Then, use wire cutters to cut the earth wire from the connector. Next, you will need to connect the earth wire directly to the circuit board. Strip a small portion of insulation from the end of the wire you just cut, and then use a soldering iron to solder the wire to the circuit board. Make sure the connection is secure and that the wire is not touching any other components on the circuit board. Once the wire is securely attached to the circuit board, test your tail light to make sure it is working properly. If everything is functioning as expected, you should be good to go! By wiring the earth wire directly to the circuit board, you can bypass any issues with the connector and ensure that your tail light is functioning as it should. However, if you're not comfortable with soldering or working with electrical components, it's best to seek the assistance of a professional mechanic. 🌐 Visit our website for more: www.sp88.co.uk 🛒 Shop for Car Accessories: https://sp88.co.uk/shop-for-car-acces...