How To Make A Beautiful Fall Wreath And Bows In Minutes #fallwreath #falldecordiy

DIY Fall Bow with Three Ribbons (Starts at 0:45) Materials required: • 100-yard Bowdabra bow wire • Large Bowdabra • Plaid Ribbon Roll (3 yards) • Orange Ribbon Roll • Burlap Ribbon Roll Process: 1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra. 2. She takes the plaid ribbon, flips it inside out, places it on the Bowdabra, and creates 7 loops. 3. After that, she takes the orange ribbon, flips it inside out, places it on the Bowdabra, and creates 6 loops. 4. In the same fashion, she places the burlap ribbon in and creates 8 loops and 1 button loop. 5. Then, she pulls the bow wire from one end to the other and ties the bow. 6. She finishes off by fluffing all the loops. DIY Fall Bow Wreath (Starts at 8:52) Materials required: • 100-yard Bowdabra bow wire • Large Bowdabra • Orange Plaid Ribbon Roll • Grapevine Wreath • Orange Flower picks, Pumpkin Picks Process: 1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra. 2. Next, she takes the orange flower picks, and pumpkin picks and lays them in the Bowdabra. 3. After cutting the dovetail pattern on the tail ends, she puts a little piece of the ribbon in the Bowdabra. 4. She places the ribbon in and creates 5 more loops on the Bowdabra. 5. Now, she scrunches everything down with the Bowdabra wand. 6. She pulls the bow wire from one end to the other and ties the bow. 7. In the end, she sticks the bow securely to the wreath. A Candy Cane Wreath (Starts at 12: 18) Materials required: • 100-yard Bowdabra bow wire • Large Bowdabra • Large candy cane wireframe • Vibrant red and white candy cane ribbon roll • Red Ribbon Roll • Scrunchy Ribbon Roll (Silver, Red) Process: 1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra. 2. She takes the silver scrunchy ribbon and scrunches it down the Bowdabra. 3. Then she picks up the red scrunchy ribbon and silver scrunchy ribbon and scrunches them down the Bowdabra. 4. She places some red-silver decorative picks on the Bowdabra. 5. After that, she places a piece of red ribbon, a piece of red and white candy cane ribbon, and one last piece of silver scrunchy ribbon on the Bowdabra. 6. She pulls the bow wire from one end to the other and ties the bow. 7. In the end, she sticks the bow securely to the wreath. Deco Mesh Bow (Starts at 18:45) Materials required: • 100-yard Bowdabra bow wire • Large Bowdabra • Deco Mesh (Sky-Blue) • 2 ½ yards White Sheer Ribbon Process: 1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra. 2. She takes the deco mesh and scrunches it down into the Bowdabra. 3. She takes the white sheer ribbon, flips it inside out, places it on the Bowdabra, and creates 8 loops. 4. In the end, she secures the bow with several wire knots in the back and finishes off by fluffing the loops. DIY Fall Bow with Three Ribbons (Starts at 21:52) Materials required: • 100-yard Bowdabra bow wire • Large Bowdabra • Orange and Green Plaid Ribbon Roll • Green Ribbon Roll • Orange Decorative Picks • Yellow/Orange Berry and Flower Picks Process: 1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra. 2. She places some orange decorative picks into the Bowdabra. 3. After that, she places one little piece of green plaid ribbon and one piece of orange plaid ribbon on the Bowdabra. 4. In the same fashion, she places one piece of green ribbon, orange plaid ribbon, green plaid ribbon, green ribbon, green plaid ribbon, green ribbon, and orange plaid ribbon one by one on the Bowdabra. 5. She lays the Yellow/Orange Berry and Flower Picks on top of these ribbons and pulls the bow wire from one end to the other and ties the bow. Tree Topper Bow (Starts at 24:38) Materials required: • 100-yard Bowdabra bow wire • Large Bowdabra • 5” wide Polka dot Print Red Ribbon Roll Process: 1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra. 2. After cutting off the tails from the red ribbon roll, she places them right into the Bowdabra. 3. She places the ribbon in, flips it inside out, and creates big 7 loops and 1 button loop. 4. Next, she secures the bow with several wire knots in the back and finishes off by fluffing the loops. DIY Mini Bow (Starts at 28:18) Materials required: • 100-yard Bowdabra bow wire • Mini Bowdabra • Blue-Silver Glittery Sheer Ribbon Roll Process: 1. Sandy folds the bow wire in half and tucks it underneath the Bowdabra. 2. After cutting the dovetail pattern on the tail ends, she puts a little piece of the ribbon in the Bowdabra. 3. She places the ribbon in, flips it inside out, and creates 7 loops and 1 button loop. 4. Next, she secures the bow with several wire knots in the back and finishes off by fluffing the loops. Follow us on: Facebook -   / bowdabra   Instagram - https://instagram.com/bowdabra?igshid... Pinterest -   / _created