RC Drift Car Alignment Settings 2.0

Alignment on your RC Drift Car can be a critical tuning aspect that might be confusing to some new commers to the RC Drift hobby. In this video, I talk about my personal theories with wheel alignment on my reveD RDX and Yokomo RD2.0 rc drift cars. I’ve gone to the track and tested out these settings and here is where I’m at for the time being, like I said I change things pretty often. I tested the rear camber link in both positions and for me the lower hole on the chassis side felt the best. The rear springs were a bit hard so I went back to the ReveD medium red springs. I’m in the process of adding a new capacitor on to the XD10 pro because I might have reverse polarity popped mine, whoops. I’ll list all my alignment setting here for you to have in one spot and like I said before, these might work for some people and others might not like them, tuning your rc drift car is very subjective so tune to what feels good for you. I hope that some of these explanations helped you visually see the difference in contact patch and what the tire is doing while you’re drifting to hopefully help you better understand and set up your rc drift car. RC Drift Tuning Tools Alignment Rack - https://amzn.to/4huNuDn YR Alignment Rack - https://amzn.to/4hwHwlp Camber Gauge - https://amzn.to/3FqApOl Hex Driver Set - https://amzn.to/425i1mO Turnbuckle Wrench - https://amzn.to/3DJpT41 Hobbywing XD10 Pro - https://amzn.to/3XPo1xq Hobbywing D10 10.5t - https://amzn.to/3FqskJc I know this one was a long one so for those of you who watched until the end, thank you, I appreciate all the new subscribers! make sure you hit that thumbs up button if you like what you see and subscribe for more awesome RC content! thanks for watching! For Business Inquiries - [email protected] My Alignment RDX Scarab - Front - Camber -8 Degrees Toe +2 Degrees Caster +6 Degrees Wheel Hex 4mm Wheel offset +8mm Rear - Camber -3 Degrees Toe -1.1 Degrees Wheel Hex EZHub 5mm Wheel Offset +8mm Rear Camber Link Upper hole on Hub and lower inside hole on chassis. Total Chassis Weight with battery - 1,130g