How to Replace Combination Switch 2005-2009 Chevy Equinox

Buy Now! New Turn Signal Combination Lever from 1AAuto.com https://trq.video/ib-1AZHS00253 A combination switch typically controls turn signals, windshield wipers, headlights, and more. If one of those systems are not working correctly on your vehicle, you might need to replace the combination switch. This video shows you how to install a new combination switch on your 2005-2009 Chevy Equinox. This repair was done on a 2008 Chevrolet Equinox LT 3.4L and the process should be similar on the following vehicles: 2005 Chevrolet Equinox 2006 Chevrolet Equinox 2007 Chevrolet Equinox 2008 Chevrolet Equinox 2009 Chevrolet Equinox Tools you will need: • Pocket Screwdriver • 7mm Socket https://trq.video/oaEz-1AXAA00017 • Socket Driver Subscribe:    / @trq   Check out our playlist: Chevy Equinox 2005-2009 1st Generation:    • Chevy Equinox 2005-2009 1st Generation   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.