How to Replace Front CV Axle Assemblies 2012-2018 Nissan Altima
Buy Now! New CV Axle Assembly from 1AAuto.com https://trq.video/ib-1AACV00434 This video shows you how to install new front CV axle assemblies from TRQ on your 2012-2018 Nissan Altima. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This repair was done on a 2016 Nissan Altima Base 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles: 2012 Nissan Altima 2013 Nissan Altima 2014 Nissan Altima 2015 Nissan Altima 2016 Nissan Altima 2017 Nissan Altima 2018 Nissan Altima Tools you will need: • Pry Bar https://trq.video/o3X-1AXAA00020 • 18mm Wrench • 21mm wrench • 10mm Socket https://trq.video/obvx-1AXAA00017 • 18mm Socket • 19mm Socket • 21mm Deep Socket • 32mm Socket https://trq.video/odz-1AAST00003 • Trim Tool Set https://trq.video/oaoG-1AXXX00006 • Large Locking Pliers • Needle nose pliers https://trq.video/oGV-1AXAA00051 • Needle nose pliers https://trq.video/oGV-1AXAA00052 • Side Cutters • Ratchet https://trq.video/obUU-1AXAA00016 • Socket Extensions https://trq.video/obR7-1AXAA00015 • Torque Wrench https://trq.video/oaX4-1AXAA00044 • Anti-Seize Grease • Gloves https://trq.video/oaHk-1AXSS00048 • Safety Glasses • Chisel https://trq.video/omT-1AXAA00055 • Drain Pan • Floor Jack https://trq.video/oanh-1AXAA00068 • Hammer • Small Hook • Wheel Chocks Subscribe: / @trq Check out our playlist: Nissan Altima 5th Generation 2012-2018: • Nissan Altima 5th Generation 2012-2018 ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
