How to replace the Front CV Axle 2013-2018 Nissan Altima 🚗

How to replace the Front CV Axle 2013-2018 Nissan Altima 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/ALTIMA Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS ⚙️ NEEDED CARPARTS AND PRODUCTS CV Axle : https://carparts.solutions/CVAxleD_AL... and https://carparts.solutions/CVAxleP_AL... 💪 TIGHTENING TORQUES Strut lower bolts : 103 Ft-lbs Wheel hub nut : 135 Ft-lbs 🛠 TOOLS The toolbox recommended by CARPARTS.COM to repair your Nissan Altima : https://carparts.solutions/ToolBox List of the tools we used to replace the CV axle on a Nissan Altima : Hydraulic jack : https://carparts.solutions/FloorJack Jack stands : https://carparts.solutions/JackStands Wheel lug wrench Pliers Flat head screwdriver Breaker bar 32mm socket Ratchet 21mm socket 21mm wrench Plastic mallet Crowbar Torque wrench : 20 to 250 Ft-lbs https://carparts.solutions/TorqueWren... 100 to 600 Ft-lbs https://carparts.solutions/TorqueWren... Pin punch Hammer Marker Don't forget to subscribe :    / @carpartscomofficial   🛻 COMPATIBLE VEHICLES The operation and tools displayed in the video should be available on the following vehicles : 2013 Nissan Altima 2014 Nissan Altima 2015 Nissan Altima 2016 Nissan Altima 2017 Nissan Altima 2018 Nissan Altima 📽 🛠 USEFUL VIDEOS 🛠 📽 How to jack your Nissan Altima safely :    • How to jack your Nissan Altima safely...   ⚠️ CARPARTS.COM'S INFOS If your vehicle is equipped with aluminum rims, you will need to remove the wheel first before you can remove the central rim cover. Make sure the CV axle is properly inserted in the gearbox. Finish tightening the hub nut once the vehicle is on the ground, using a torque wrench. Finish tightening the hub nut once the vehicle is on the ground, using a torque wrench. You can then complete the second hub nut tightening phase by adding angular clamping. You can draw visual markers on the nut or on your rim to better visualize the stroke of your wrench. 🚨 DISCLAIMER This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area. 📚 CHAPTERS 0:00 Intro 0:21 How to pull up your Altima 0:49 Loosen the wheel hub 1:50 Unscrew the strut lower bolts 2:15 Disengage the strut from the wheel knuckle. 2:52 Remove the CV Axle from the gearbox 3:06 Put the CV axle back 3:28 Put the wheel knuckle into the strut + tightening torques 4:37 Put your Altima back on the ground 4:56 Tighten the hub nut + tightening torques