How to Replace Turn Signal Combination Lever 1999-2006 Chevrolet Silverado 1500

Buy Now! New Turn Signal Combination Lever from 1AAuto.com https://trq.video/ib-1AZCC00167 This video shows you how to install a new turn signal combination lever from TRQ on your 1999-2006 Chevrolet Silverado 1500. This repair was done on a 1999 Chevrolet Silverado 1500 LS 4.8L Standard Cab Pickup 2-Door 4WD Automatic and the process should be similar on the following vehicles: 1999 Chevrolet Silverado 1500 2000 Chevrolet Silverado 1500 2001 Chevrolet Silverado 1500 2002 Chevrolet Silverado 1500 2003 Chevrolet Silverado 1500 2004 Chevrolet Silverado 1500 2005 Chevrolet Silverado 1500 2006 Chevrolet Silverado 1500 Tools you will need: • Pocket Screwdriver • 8mm Wrench https://trq.video/oib-1AXAA00011 • 4mm Socket • 7mm Socket https://trq.video/obgC-1AXAA00017 • Side Cutters • E6 Inverted Torx Socket • T25 Torx Driver • T25 Torx Socket • Ratchet https://trq.video/obFS-1AXAA00016 • Electrical Tape • Gloves https://trq.video/oaha-1AXSS00048 • Safety Glasses • Wire Ties • Pick https://trq.video/oRx-1AXAA00037 • Utility Knife https://trq.video/ofQ-1AXAA00082 Subscribe:    / @trq   Check out our playlist: Chevy Silverado 1999-2006 1st Gen:    • Chevy Silverado 1999-2006 1st Gen   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.